Exhibition

Home > Exhibition > Content
Copper-plastic composite tape for wire appearance, conductor wire diameter, and specification requirements
Oct 31, 2018

In the process of purchasing copper-plastic composite tape, it is necessary to purchase suitable wires according to its own power load. At the same time, it is necessary to look at the wire and cable to explain the raw material composition and model specifications introduced in the water, so as to reduce the occurrence of safety hazards. At the same time, it also makes life last longer. Specifically, there are three main points that need attention.

1. Appearance of electric wire: Consumers should pay attention to the appearance of the electric wire when the electric wire is purchased, the appearance of the electric wire should be smooth and flat, the insulation and the sheath layer are not damaged, the printing is clear, and there is no greasy feeling when the hand touches the electric wire. From the cross-section of the wire, the thickness of the insulation or sheath on the entire circumference of the copper-plastic composite strip wire should be uniform, should not be eccentric, and the insulation or sheath should have a certain thickness.

2. Conductor wire diameter: Consumers should pay attention to whether the wire diameter of the conductor matches the cross section clearly indicated on the certificate when purchasing the wire. If the conductor cross section is small, it is easy to cause the wire to heat up and cause a short circuit. Aluminum-plastic composite tape manufacturers recommend that household lighting lines and wires use products with a size of 1.5 square millimeters or more; household appliances with high power such as air conditioners and microwave ovens should use wires of 2.5 square millimeters or more.

3. Standard use: The wiring should be standardized. The BV single-core wire should be used to wear the fixed line. Be careful not to damage the wire during wiring. Do not damage the wire when decorating the room; do not connect the connector in the middle of the same route; Do not touch the line when the box (box). The above mainly introduces the method of identifying wire and cable for general commercial and residential residential users.http://www.copolymercoatedaluminumtape.com/








Copyright © WUXI SUDA NEW MATERIAL TECHNOLOGY CO.,LTD All Rights Reserved.Tel: +86-510-85189690