Exhibition

Home > Exhibition > Content
How to ensure the use of the aluminum plastic composite belt?
May 22, 2018

In order to ensure the use of aluminum plastic composite belt, we adopt strict standards for quality control in all aspects of the production process. First of all, it is from the raw material. For example, the aluminum foil used in the aluminum plastic strip must comply with the relevant regulations. Moreover, the surface of polyester must be kept smooth and clean, and it should not contain wrinkles or conductive impurities.


However, a small number of crystal points can be allowed. Secondly, there are strict requirements for the appearance quality of the aluminum plastic composite belt. In general, the surface of the aluminum plastic belt should look smooth, clean, free of impurities, and do not contain bubbles or wrinkles, and its edges should be guaranteed to be neat and not damaged. Only in this way can the standard of aluminum plastic composite belt be met.


Of course, the third requirement is size. Generally, in order to ensure the use of the aluminum plastic composite belt, we should keep the diameter of the aluminum plastic tape within 300 mm when we produce the aluminum plastic belt, and the width of the aluminum plastic belt should ensure that the allowable deviation is not more than 0.20 mm of the standard width. Of course, if the customer needs, different specifications and models can be customized.


It should be noted that we should check the quality of the aluminum plastic composite strip as well. Usually, the aluminum-plastic strip needs to complete the factory inspection and type test successively. And ensure that all tests conform to the standard requirements.


In general, when the finished product is obtained, we need to test the aluminum plastic composite belt for each batch. In general, the quality inspection department is inspected according to the inspection rules of the factory. Only after the confirmation is qualified can we go to the factory. Moreover, the corresponding inspection certificate should be matched when leaving the factory. Only in this way can the aluminum plastic composite belt be used reasonably and reasonably.http://www.copolymercoatedaluminumtape.com/








Copyright © WUXI SUDA NEW MATERIAL TECHNOLOGY CO.,LTD All Rights Reserved.Tel: +86-510-85189690