Exhibition

Home > Exhibition > Content
Production requirements of copper - plastic composite belt for cable
May 18, 2018

In the production of copper and plastic composite belt products, we must ensure that certain production requirements are met. So, do you know what the specific requirements are? To understand, we need not only to ensure that the selected raw materials meet the production requirements, but also to ensure that the appearance of the products should meet the specific production standards. Let's look at the details.

First of all, in order to ensure that the production of copper and plastic composite belt products can meet the actual usage requirements, we need to ensure that the selected raw materials meet the production requirements. Among them, the copper mold with the use of copper foil in the need to comply with the regulations of GB/T 5187-2008 standard requirements, and need to keep your polyester surface level off is smooth, without impurities, no adverse phenomenon such as fold, crystal point allows exist.

Secondly, there are strict requirements on appearance. In other words, we should ensure that the products meet the requirements of compact compound when producing copper and plastic composite belts. In addition, the surface smoothness and smoothness should also be guaranteed. No dirt, bubbles and other problems are allowed, and no other mechanical damage is allowed. The edges should be kept flat and undamaged.

In addition, the cable used in the production of copper and plastic composite belt should be tight, and if it is used vertically, there should be no loose bands or straddle problems. If it is a belt, it is not allowed to have self-adhesive problems, and its edges should not have obvious flouncing.

The last thing to notice is its size. Under normal circumstances, the diameter of the copper - plastic composite belt of cable shall not exceed 300 mm. The width error shall not exceed 0.20mm of the standard width. In addition, it is necessary to ensure that its mechanical properties meet the requirements of normal use.http://www.copolymercoatedaluminumtape.com/








Copyright © WUXI SUDA NEW MATERIAL TECHNOLOGY CO.,LTD All Rights Reserved.Tel: +86-510-85189690