Home > Exhibition > Content
Shielding effect and working temperature of aluminum-plastic composite tape
Aug 22, 2018

The aluminum-plastic composite tape is a new type of self-adhesive composite tape during the operation. The outer composite film of the product adopts EAA material with excellent heat sealability, so it is combined with ordinary polyethylene (PE). Compared with the composite tape, it has a lower initial bonding temperature and a higher heat-sealing bonding property, and the composite tape can greatly reduce the work of the heat gun in the forming process of the communication cable and the cable composite tape longitudinal package. Temperature and air flow.

 The waterproof layer and the shielding layer of the aluminum-plastic composite tape are mainly bonded by glue, and the waterproof layer is disposed on the shielding layer, and the detection layer is provided at the center of the waterproof layer and the shielding layer, and the damage of the composite tape can be quickly detected. It is convenient for staff maintenance.

 Aluminum-plastic composite tape shielding, low cost and short production time, good shielding effect, so the shielding method often used by many manufacturers is not resistant to bending and is not tensile, so it is easy to disconnect in the middle of production and use. Be sure to add a drain wire. However, most electrical engineers are still accustomed to copper wire braided shielding, soft and resistant to bending and stretching.http://www.copolymercoatedaluminumtape.com/

Copyright © WUXI SUDA NEW MATERIAL TECHNOLOGY CO.,LTD All Rights Reserved.Tel: +86-510-85189690